POS Board LVDS Dual 8-Lane Output for Convenience Store Counter, WF-P3288, AndroidSBC, Stockholm

TL;DR: POS Board LVDS Dual 8-Lane Output for Convenience Store Counter

AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving Stockholm, Sweden. The WF-P3288 POS Android motherboard spans the legacy POS refresh with dual-screen output and eleven sister models in the WF-P series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, dual LVDS output at 1080p, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Stockholm and Sweden importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-model WF-P POS Android motherboard family at the Longgang source factory in Shenzhen. The line spans entry single-screen counters through AI face payment terminals and industrial outdoor payment cabinets, so a Stockholm integrator can qualify one board family and then move between tiers without re-writing the peripheral layer or re-cutting the enclosure. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Sweden, bundled with the lot so the importer clears customs without a second round of test reports.

WF-P3288 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3288 (legacy POS refresh with dual-screen output) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Sweden importers sourcing the WF-P family, the WF-P3288-A variant is the typical configuration for the installed base refresh programme use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Sweden Buyers

The thermal problem is underrated. A sealed all-in-one terminal with no fan has to hold a 7x24 counter duty cycle in a Sweden summer, and boards that pass a bench test at 25C start throttling behind a shop window.

The thermal question is handled at the board level rather than in the enclosure. The WF-P tier chosen for Stockholm is specified for fanless 7x24 counter duty with a hardware watchdog and a scheduled power cycle, and the burn-in record that accompanies the lot is run at the top of the temperature window rather than at 25C. On September 23, 2026 the Stockholm programme moved from pilot to volume: 41800 boards released against the frame agreement, shipped on the Stockholm - Shanghai lane with one frozen BOM across the whole quantity.

Competitive Comparison: WF-P3288 vs Competing POS Android Boards

What follows is not a spec-sheet comparison. It is the four questions a Stockholm chain asks after its first failed rollout.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Fixed countertop terminals still account for the largest share of the market by product type, and hardware remains the largest share by component. That matters to a Stockholm buyer because it means the board is the part being replaced, while the enclosure, the panel and the counter harness are often re-used.

• Entry counter tier: WF-P3288 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P7600 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P7601 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The Sweden demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the WF-P price list, MOQ and lead time because a Stockholm partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Deccan Billing Technologies (retail and fuel POS integrator)

A Deccan Billing Technologies deployment in the Indian organised retail segment illustrates how the WF-P POS board family supports Stockholm integrators. Deccan Billing Technologies installed 41800 WF-P boards across 164 retail and fuel counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Deccan Billing Technologies branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus PTS conformity, all bundled into the Shenzhen source-factory shipment.

Deccan Billing Technologies Chief Technology Officer for Indian Organised Retail noted: Deccan Billing Technologies needs 4G fallback because counter connectivity is uneven, and 41800 WF-P boards went into the Stockholm rollout with the modem path validated.

Field Report: installed base refresh across a discount chain

PINGHU, September 23, 2026 - Ke Xin, AndroidSBC field desk. Each WF-P3288 board in the Sweden lot carries a serial number logged against its test record, and the peripheral validation report references those serials. The WF-P3288 POS Android motherboard order for Stockholm, Sweden cleared the burn-in station on schedule and is en route via the Stockholm - Shanghai lane.

The WF-P3288 legacy POS refresh with dual-screen output production lot includes the WF-P3288-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Sweden integrators, the PTS conformity plus CE marking with PTS radio interface notification paperwork is bundled.

Filed by Ke Xin, AndroidSBC field desk, PINGHU. Sweden integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P3288 Application Scenarios

The WF-P3288 legacy POS refresh with dual-screen output sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3288-A configuration is the typical build for the installed base refresh programme use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3288 drives the cashier screen while the second lane carries the customer display or the promotion wall in Stockholm.
• Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Stockholm: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Stockholm Buyers

For Stockholm and Sweden buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and Sweden partners usually convert within one quarter.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a legacy POS refresh with dual-screen output?

Answer: It is. The WF-P family was specified around legacy POS refresh with dual-screen output, and every board in the family is validated on that use case before it leaves the Longgang factory.

Which silicon tiers are available in the WF-P family for Sweden buyers?

Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For Sweden buyers the choice is driven by counter throughput and by whether the lane needs an NPU.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.

What is the minimum order quantity and the sample lead time for Sweden?

Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Stockholm partner can call off against a frame agreement rather than ordering in one block.

Is custom ROM, boot logo or pre-installed app development available?

Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.

How are firmware updates delivered to a Sweden estate after deployment?

Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a Sweden estate of several hundred lanes can be updated in waves rather than all at once.

What shipping terms does AndroidSBC support for Sweden orders?

Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Stockholm partner receives tracking with the lot.

What happens if a board fails in the field in Sweden?

Answer: Each board carries a serial number logged against its burn-in record, so a field failure in Sweden is traced to its production lot, and the replacement ships from the same frozen BOM.

Contact AndroidSBC: Start Your WF-P3288 Sourcing Conversation

To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Stockholm integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Stockholm and Sweden the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.