Industrial X86 Motherboard & Embedded PC | Wanlin
Hotline
Customer Service Hotline:

+8613261677119

News and Trends

Query Terminal A4 Printer Board for Bank Branch Lobby, WF-K3566, AndroidSBC, Stockholm

TL;DR: Query Terminal A4 Printer Board for Bank Branch Lobby

AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-K family serving Stockholm, Sweden. The WF-K3566 self-service query terminal Android motherboard spans the compact self-service query terminal and eleven sister models in the WF-K series, all built on the RK3566 quad-core ARM Cortex-A55 1.8GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, single 1080p output plus LVDS, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Stockholm and Sweden importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

AndroidSBC WF-K3566 Self-Service Query Terminal Android Motherboard for Stockholm, Sweden

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

As a board-level manufacturer rather than a kiosk assembler, AndroidSBC gives Sweden buyers the WF-K self-service query terminal motherboards without the cabinetry markup. The twelve-model family is produced in Longgang, Shenzhen, under one BOM discipline, and Stockholm integrators integrate it into their own enclosures and housings. Every model is validated on the same burn-in rig in Longgang before it is packed for Sweden, and the same rig logs are available on request.

WF-K3566 Technical Specifications

ParameterAndroidSBC WF-K3566 (compact self-service query terminal)Industry Average
ProcessorRK3566 quad-core ARM Cortex-A55 1.8GHz 64-bit SoCOlder 28nm or 40nm quad-core SoC
Process node22nmOlder 28nm or 40nm process
GPUMali-G52 2EEOlder Mali-450 or basic GPU
NPU / AI0.8 TOPSNo NPU on competing entry boards
Memory2GB LPDDR4DDR3 1GB / 2GB on competing boards
Storage16GB eMMCeMMC 5.0 8GB / 16GB on competing boards
Display outputsingle 1080p output plus LVDSSingle HDMI 1080p only on competing boards
Touch support10-point capacitive touchResistive single-touch on competing boards
Operating systemAndroid 11Android 8 or Android 9 on competing boards
ConnectivityWiFi 5 plus Bluetooth 5.0 plus Gigabit EthernetWiFi 4 plus 10/100M Ethernet on competing boards
Query peripheralsCapacitive touch, thermal printer, document scanner, card readerNo bundled touch, printer or scanner driver SDK on competing boards
Operating temperature0C to 50C0C to 40C on competing boards

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3566 (compact self-service query terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Sweden importers sourcing the WF-K family, the WF-K3566-A variant is the typical configuration for the compact clinic and pharmacy query rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Sweden Buyers

Buyers in Stockholm often treat a self-service query terminal as a commodity board, then discover that the printer driver, the card reader stack and the kiosk-mode lockdown each need separate validation against Sweden deployment conditions.

Add the compliance layer and the picture gets tighter. For Sweden the paperwork runs through CE marking with PTS radio interface notification, and a board that was never validated against it turns into a re-test cycle that Stockholm integrators pay for in schedule, not just money. The factory answers with lot-level BOM control, so the Stockholm order of 85500 units is the 4th in a series that never re-qualifies the peripheral stack.

Competitive Comparison: WF-K3566 vs Competing Self-Service Query Terminal Android Boards

Against the query boards usually quoted in Sweden, the WF-K board is positioned on integration completeness rather than on a single performance number for Stockholm.

  • Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
  • Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
  • Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
  • Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

Query terminals are becoming the default front door for routine information requests. In Sweden this is visible in tenders that bundle the compact self-service query terminal with identity peripherals and printing, and Stockholm integrators are quoting against those bundles rather than against bare boards.

  • Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3566 and WF-K8801 tiers ship in board form with the enclosure left to the local partner.
  • Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K8801 and WF-K3600 configurations address that pattern directly.
  • Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K3600 over boards that re-spin silicon between lots.

The direction of travel for Stockholm is towards fewer board variants deployed across more sites, which is exactly the configuration the WF-K series was built around for Sweden.

Partner Success Story: Deccan Info Technologies (retail and telecom self-service vendor)

A Deccan Info Technologies programme in the India retail and telecom segment illustrates how the WF-K family from AndroidSBC supports Stockholm integrators on the ground. Deccan Info Technologies installed 85500 query kiosks across retail and telecom service points.

  • OEM relationship: AndroidSBC private-label SKU shipped with Deccan Info Technologies branding and CE / FCC / RoHS files bundled.
  • Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
  • Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
  • Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
  • Compliance paperwork: CE / FCC / RoHS plus PTS conformity, all bundled into the Shenzhen source-factory shipment.
Deccan Info Technologies Head of Delivery for India Retail and Telecom highlighted: Deccan Info Technologies needed high volume at a short lead time, and 85500 WF-K entry boards reached Stockholm on schedule with the touch and printer stack already validated.

Field Report: compact query terminal rollout at a retail pharmacy chain

SHENZHEN, September 22, 2026 - Hong Mei, AndroidSBC field desk. Because Sweden sites range from air-conditioned lobbies to unheated entrances, the WF-K3566 batch was cleared at both ends of the rated window. The WF-K3566 self-service query terminal Android motherboard order for Stockholm, Sweden cleared the burn-in station on schedule and is en route via the Stockholm - Shanghai lane.

The WF-K3566 compact self-service query terminal production lot includes the WF-K3566-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Sweden integrators, the PTS conformity plus CE marking with PTS radio interface notification paperwork is bundled.

Filed by Hong Mei, AndroidSBC field desk, SHENZHEN. Sweden integrators typically request CE plus local radio interface notification for self-service query terminal board deployments.

WF-K3566 Application Scenarios

The WF-K3566 compact self-service query terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3566-A configuration is the typical build for the compact clinic and pharmacy query rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

  • Hospital and clinic information points: the WF-K3566 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Stockholm.
  • Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
  • Government service halls: the WF-K3399 runs tax, social security and real estate information lookup, with printing available on the same board.
  • Shopping mall directories: the WF-K1330 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
  • Airport and train station concourses: high-brightness information query where the WF-K1331 has to stay readable under strong ambient light.
  • Retail and pharmacy price or product lookup: compact stations where the WF-K6180 fits a narrow counter without structural work.
  • Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
  • Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
  • Retrofit programmes in Stockholm: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Stockholm Buyers

AndroidSBC structures Stockholm partnerships around how much integration the local partner keeps in house, with Sweden projects typically choosing between three levels.

  • Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
  • Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
  • Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

For Stockholm integrators the choice usually comes down to how much of the Sweden project the local team wants to own versus how much it wants the factory to carry.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support a compact self-service query terminal?

Answer: Yes. The compact self-service query terminal is supported out of the factory image, and AndroidSBC validates it again on the production lot before the Sweden shipment leaves Shenzhen.

What is the real difference between the RK3566 tier and the other silicon tiers in the WF-K family?

Answer: The difference is workload envelope, not compatibility. A board on the RK3566 tier runs the same factory image as the rest of the WF-K family, which keeps spare parts interchangeable across a Sweden estate.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Sweden?

Answer: Yes. The conformity pack for Sweden is prepared by the factory, not by the Stockholm integrator, which removes the usual delay between arrival and installation.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: The MOQ for a first WF-K order is deliberately low so Stockholm buyers can run a field pilot: sample quantities ship in 1-3 days and a first production lot is typically 15-30 days. Sweden distribution orders scale from there.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. The WF-K baseline is Android, but Sweden buyers frequently need a custom Linux image or a stripped Android build, and AndroidSBC delivers both from the Longgang engineering team for Stockholm.

How are software updates and long-term support handled on the WF-K family?

Answer: The WF-K family carries a seven-year update commitment, staged OTA delivery and rollback capability, which lets Stockholm partners keep Sweden sites on one validated revision.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes. FBA preparation is handled at the factory for the WF-K family, so Stockholm buyers can have boards shipped directly into a Sweden fulfilment centre with the labelling already applied.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: RMA handling on the WF-K family runs against the lot record, so Stockholm partners get a traceable answer rather than a generic replacement, and Sweden estates stay on matched firmware.

Contact AndroidSBC: Start Your WF-K3566 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-K family. Stockholm integrators can reach the export desk through:

A 1-3 day sample lead applies to Stockholm and Sweden buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-K family.