Government Terminal LVDS Output Board for Tax Office, WF-S3399, AndroidSBC, Stockholm

TL;DR: Government Terminal LVDS Output Board for Tax Office

AndroidSBC sourcing desk: government self-service board pricing held flat through the current quarter serving Stockholm, Sweden. The WF-S3399 government service kiosk Android motherboard spans the dual-screen high definition service terminal and eleven sister models in the WF-S series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, dual 4K output, HDMI plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-S family from the Longgang source factory in Shenzhen to Stockholm and Sweden importers who run citizen service hall, tax and social security counter, certificate printing, identity verification, public information display and outdoor smart city programmes.

About AndroidSBC and the Government Service Kiosk Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory builder of Android motherboard platforms for unattended public service equipment. The twelve-model WF-S family covers citizen service halls, tax offices, social security counters, immigration checkpoints, housing fund centres and 24-hour municipal self-service cabinets, and it ships to Stockholm and Sweden importers on a fixed BOM per production lot. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Stockholm and Sweden catalogue SKUs.

WF-S3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-S3399 (dual-screen high definition service terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Sweden importers sourcing the WF-S family, the WF-S3399-A variant is the typical configuration for the high resolution citizen information terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Government Service Kiosk Android Motherboards for Sweden Buyers

Identity verification adds a requirement most board vendors do not plan for. A Sweden citizen terminal has to keep an audit trail, hold the key material in a trusted zone and prove both at acceptance, which is a board-level design question and not an application-layer patch.

The driver problem is solved by integration at the factory. The WF-S family arrives with capacitive and IR touch, ID card reader, fingerprint, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay drivers already on the Android image that Stockholm integrators receive. As of September 20, 2026 the Stockholm programme stands at 38500 boards booked, the 4th lot to clear the line for Sweden and the 4th to route through the Stockholm - Shanghai lane.

Competitive Comparison: WF-S3399 vs Competing Government Service Kiosk Android Boards

The WF-S family is specified against the alternatives a Stockholm integrator actually shortlists: a single-platform board vendor, a board shipped without drivers, a board without unattended-operation features, and a board that cannot drive two panels independently.

• vs single-platform board vendors: the WF-S family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-S family arrives with capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay drivers already integrated, so the {city} integrator writes the citizen service application rather than the driver layer.
• vs boards without unattended-operation features: the WF-S family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-S family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a citizen screen plus an operator screen and a mirrored duplicate.

Global Government Self-Service / Citizen Service / Public Information Terminal Market Trends

Citizen services and administration account for the largest application share of public-sector self-service deployments at about 45 percent, and dual-screen high definition service terminal programmes in Sweden are where that share converts into board orders for Stockholm integrators.

• Citizen service halls and municipal counters: WF-S3399 is the usual starting point for hall rollouts, with the dual-screen WF-S8800 as the citizen plus operator option.
• Tax, social security and housing fund terminals: the mid-tier WF-S8800 and the printing-capable WF-S8801 sister SKUs form the counter ladder, with certificate printing and queue management.
• Outdoor and 24-hour unattended cabinets: WF-S8801 and the industrial sister SKUs cover continuous-operation municipal self-service points across a city estate.

For Stockholm buyers the takeaway is narrow: specify the Sweden compliance set and the identity peripheral at the same time as the silicon, or the estate gets re-qualified later.

Partner Success Story: Deccan eGovernance Technologies (state government service integrator)

A Deccan eGovernance Technologies deployment in the India government segment illustrates how the WF-S government service board family supports Stockholm integrators. Deccan eGovernance Technologies commissioned 38500 WF-S government boards across taluk offices, citizen facilitation centres and certificate issuing kiosks.

• OEM relationship: AndroidSBC private-label SKU shipped with Deccan eGovernance Technologies branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus PTS conformity, all bundled into the Shenzhen source-factory shipment.

Deccan eGovernance Technologies Solutions Architect for India Government noted: Deccan eGovernance Technologies runs outdoor certificate kiosks as well as indoor counters, so the industrial T527 tier on the WF-S family was the deciding factor for the 38500 terminals now deployed across Sweden.

Field Report: dual-screen information terminal rollout at a public security service hall

PINGHU, Shenzhen, September 20, 2026 - Gu Wei, AndroidSBC field desk. Audit logging and secure boot were confirmed on the WF-S3399 boards in this lot before release, since Sweden acceptance for the dual-screen high definition service terminal programme asks for evidence of both. The WF-S3399 government service kiosk Android motherboard order for Stockholm, Sweden cleared the burn-in station on schedule and is en route via the Stockholm - Shanghai lane.

The WF-S3399 dual-screen high definition service terminal production lot includes the WF-S3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Sweden integrators, the PTS conformity plus CE marking with PTS radio interface notification paperwork is bundled.

Filed by Gu Wei, AndroidSBC field desk, PINGHU, Shenzhen. Sweden integrators typically request CE plus local radio interface notification for government service kiosk board deployments.

WF-S3399 Application Scenarios

The WF-S3399 dual-screen high definition service terminal sits inside a twelve-variant WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-S3399-A configuration is the typical build for the high resolution citizen information terminal use case, with identity peripheral driver SDK and staged OTA management bundled.

• Citizen service hall enquiry and queue points: WF-S3399 plus WF-S5270 form the hall entry ladder, with independent dual display output and 4K HDMI.
• Tax, social security and housing fund counters: WF-S5270 plus WF-S8800 are the usual pairing where certificate printing and ID verification run on the same board.
• Immigration and public security checkpoints: WF-S8800 is the dedicated secure identity SKU, with secure boot, trusted execution and an audit trail that survives a power cycle.
• AI identity verification and face recognition terminals: WF-S8801 plus WF-S3600 cover the vision and verification workload on the device.
• Community and neighbourhood service desks: the compact WF-S3399 and the entry-tier sister SKUs serve walk-in enquiry where counter space is limited.
• Outdoor and semi-outdoor municipal cabinets: the industrial T527 sister SKU takes the 24-hour unattended points that see a full seasonal temperature range in Stockholm.
• Hall notice and announcement networks: the H618 and A133 sister SKUs drive continuous-play public information screens across a Stockholm building estate.
• Document scanning and form filling terminals: WF-S3600 plus WF-S5270 pair the scanner and the signature pad on one board for the Stockholm administration.
• Legacy estate refresh programmes: the RK3288 and RK3399 sister SKUs match the mechanical and electrical footprint of existing Stockholm hall terminals, so a refresh does not become a redesign.

Partnership Models for Stockholm Buyers

For Stockholm and Sweden partners the commercial question is how much of the design they want to own, and AndroidSBC answers it with three tracks on one WF-S platform.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Stockholm, which is common when a distributor wins a tender that turns into a private-label line for Sweden.

Frequently Asked Questions

Does the WF-S government service kiosk Android motherboard family support a dual-screen high definition service terminal?

Answer: Yes, and it is qualified on the same production line as the rest of the family. The dual-screen high definition service terminal runs on the WF-S baseline image that Sweden buyers receive, so there is no separate integration project.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-S family?

Answer: In practice the RK3399 sets three things: how many panels the board can drive independently, whether on-device inference is available for face recognition, and how much thermal headroom the cabinet needs. Everything else in the WF-S family is common across tiers for Stockholm and Sweden.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Sweden?

Answer: Yes. The export desk prepares CE marking with PTS radio interface notification documentation alongside the PTS conformity file, and both are versioned against the board revision that ships to Stockholm and Sweden.

What are the MOQ and lead time for a first order of the WF-S government service kiosk Android motherboard family?

Answer: The MOQ depends on the track. Samples ship from one piece in 1-3 days, OEM branding starts at 100 pieces, and ODM work starts at 500 pieces, with 15-30 day mass production for Stockholm and Sweden.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-S family?

Answer: Yes. AndroidSBC writes and maintains custom firmware for Sweden public sector deployments, from kiosk-mode lockdown and pre-installed applications through to a full AOSP build or a Linux BSP port.

How are software updates and long-term support handled on the WF-S family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-S family, delivered as staged OTA with rollback. Sweden estates can hold a revision while the Stockholm integrator validates it.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-S family?

Answer: Yes. AndroidSBC supports FBA and 3PL consolidation delivery for the WF-S family, with the Port of Stockholm routing and the export documentation handled by the export desk.

How are RMA and DOA replacements handled on the WF-S government service kiosk Android motherboard family?

Answer: DOA boards are replaced on the next shipment and RMA units are repaired or replaced against the board revision record, which AndroidSBC keeps versioned for every Stockholm and Sweden lot.

Contact AndroidSBC: Start Your WF-S3399 Sourcing Conversation

To start a WF-S government service kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Stockholm integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Stockholm and Sweden the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.