128GB eMMC Guide Query Board for Dual-Screen Guide, WF-G3601, AndroidSBC, Stockholm

TL;DR: 128GB eMMC Guide Query Board for Dual-Screen Guide

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-G guide kiosk board family serving Stockholm, Sweden. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Stockholm and Sweden importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group with more than a decade of OEM and ODM work on Rockchip and Allwinner platforms. The smart guide kiosk Android motherboard family covered here is the WF-G line: twelve models across eight silicon options, from the Rockchip RK3588 8nm octa-core tier with the Mali-G610 MP4 GPU and 6 TOPS NPU, through the RK3568 and RK3566 22nm mid tier, the RK3288 and RK3399 28nm legacy tier, and the Allwinner A133, H618 and T527 entry and industrial tiers. The family is aimed at the screens that answer a visitor question: mall floor directories, tenant and product finders, transit and hospital wayfinding, hotel lobby guides, museum exhibit points and outdoor smart city information pillars. That is the workload Stockholm and Sweden integrators are quoting for, and the WF-G board is the part that decides whether the answer arrives in a second. AndroidSBC keeps buffer stock on the Rockchip and Allwinner tiers so Stockholm and Sweden orders do not wait on a wafer allocation, and each production lot is locked to one BOM for traceability.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Sweden importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Sweden Buyers

The seventh obstacle is dual-screen behaviour. Directory and promotion terminals need two independent video paths, and Stockholm integrators often discover at the site that a board advertised as dual-screen only mirrors the same content to both panels.

Lifecycle is planned at the point of sale. AndroidSBC keeps a seven-year firmware window on the WF-G family, publishes a migration path from the 28nm legacy tiers and the A133 entry tier, and holds buffer stock so Stockholm and Sweden programmes are not stranded when a platform ages out. PTS conformity and the CE marking with PTS radio interface notification file set stay versioned alongside. As of September 18, 2026 the Stockholm programme stands at 130000 boards booked, the 4th lot to clear the line for Sweden and the 4th to route through the Stockholm - Shanghai lane.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

AndroidSBC positions the WF-G family on breadth rather than on a single benchmark number: eight silicon options, twelve models, one driver package and one update channel. That framing is what Stockholm and Sweden procurement teams compare against a two-tier competitor line-up.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Screen estates keep pulling board demand: mall smart guide kiosk programmes in Sweden are the near-term driver and Stockholm integrators are quoting against 2026 delivery windows. Grand View Research sized the global interactive kiosk market at USD 34.79 billion in 2024 and models a 7.2% CAGR to USD 52.74 billion by 2030, with hardware holding more than 44% of revenue. The practical read for Stockholm is that the mall smart guide kiosk board is a platform decision that locks in the content stack for the life of the estate.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3288 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3288 and the industrial WF-G3399 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3399 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

Two numbers decide a Sweden guide kiosk programme: how many screens a venue actually needs, and how many years the estate has to be supported. AndroidSBC plans the WF-G family against both and shares the model with Stockholm integrators on request.

Partner Success Story: Deccan Mall Technologies (retail technology integrator)

A Deccan Mall Technologies deployment in the India retail and commercial segment illustrates how the WF-G guide kiosk board family supports Stockholm integrators. Deccan Mall Technologies integrated 130000 WF-G guide boards into mall directories, hospital orientation points and government service counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Deccan Mall Technologies branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus PTS conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Deccan Mall Technologies Solutions Architect for India Retail and Commercial: Deccan Mall Technologies serves venues across very different power conditions, and the auto power-on after mains failure plus the wide input tolerance on the WF-G board kept 130000 screens in Stockholm up through a difficult Sweden summer.

Field Report: floor guide counter installation at a community shopping mall

BAOLONG, Shenzhen, September 18, 2026 - Jian Guo, AndroidSBC field desk. Cartons were drop-tested and the WF-G3601 boards re-verified afterwards, with the mall smart guide kiosk image and the certification label checked against the shipment manifest for Sweden. The WF-G3601 smart guide kiosk Android motherboard order for Stockholm, Sweden cleared the burn-in station on schedule and is en route via the Stockholm - Shanghai lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Sweden integrators, the PTS conformity plus CE marking with PTS radio interface notification paperwork is bundled.

Filed by Jian Guo, AndroidSBC field desk, BAOLONG, Shenzhen. Sweden integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G1330 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1331 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G6180 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G5270 plus WF-G1330 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1331 plus WF-G5270 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1330 plus WF-G6180 carry the guest orientation flow in Stockholm.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G5270 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Stockholm: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Stockholm Buyers

Entry into the WF-G family is available on three tracks for Stockholm and Sweden buyers, and they are designed so a partner can move between them without re-qualifying the platform.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

One production line in Longgang serves all three tracks, so a Stockholm partner who starts on the distribution track and later commissions an ODM design stays on the same Sweden supply chain.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. The WF-G family ships mall guide kiosk as a stock configuration on Rockchip and Allwinner silicon alike, flashed and functionally tested at the Wanlin Longgang source factory before the lot leaves the line for Sweden.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The practical difference is display paths, NPU headroom, thermal range and I/O. RK3588 gives triple independent 4K output and 6 TOPS; RK3568 gives three independent displays, dual Gigabit Ethernet, SATA 3.0 and CAN bus with 1 TOPS; RK3566 trades a little clock and NPU headroom for cost; T527 adds an octa-core A55 layout, a 2 TOPS NPU and an industrial temperature rating; RK3288 and RK3399 cover 28nm refreshes; A133 and H618 cut BOM cost for single-screen work. AndroidSBC maps RK3568 to the deployment rather than to the headline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Sweden?

Answer: Yes. The Longgang factory keeps the CE, FCC, RoHS and REACH declarations on file for the WF-G family and adds PTS plus CE marking with PTS radio interface notification for Sweden shipments. Stockholm importers receive the full dossier with the first lot, not after it.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: For Stockholm and Sweden buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. Firmware customisation is handled by the same engineers who keep the reference BSP, so a Stockholm request for a custom launcher, a locked kiosk mode or an added peripheral driver goes into the maintained branch rather than into a one-off fork.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-G family. In practice that means security patches, driver updates and content client updates are published on a maintained branch, and Stockholm integrators choose when to take them.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the PTS documentation set for Sweden customs at Port of Stockholm.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: RMA and DOA are handled at the source. DOA boards are replaced from Shenzhen buffer stock on photo or video evidence, and RMA units are repaired or replaced at the Longgang facility with a defined turnaround written into the supply agreement.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Stockholm integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Stockholm and Sweden the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.